Materials, Grades, and Properties
Tianyuan brand | type | form | specifications | Applicable substrate materials | hardness HRC | Cladding thickness(mm) | salt spray test NSS | Appearance Rating | use |
JF101 | FeCr alloyed powder | powder | 100-270 mesh | Carbon steel, mold steel, stainless steel, aluminum alloy, titanium alloy, copper alloy, nickel-based alloy | 28-32 | 4-Jan | ＞500h | Level 9 | Laser additive manufacturing of high corrosion-resistant components |
JF102 | FeCr alloyed powder | 100-270mesh | 42-45 | 3-Jan | ＞500h | Level 9 | High corrosion resistance parts laser additive outer wall | ||
JF103 | FeCr alloyed powder | 100-270mesh | 50-55 | 2-Jan | ＞500h | Level 9 | Laser additive manufacturing of hard components | ||
GH3625 | Nickel-based alloy powder | 100-270mesh | 22-27 | 5-Jan | ＞500h | Level 9 | High corrosion resistant parts surface laser additive | ||
Ni35A | Nickel-based alloy powder | 100-270mesh | 26-28 | 3-Jan | ＞500h | Level 9 | High corrosion resistance parts laser additive outer wall | ||
Ni35B | Nickel-based alloy powder | 100-270mesh | 28-32 | 3-Jan | ＞500h | Level 9 | High corrosion resistance parts laser additive outer wall | ||
GH4169 | Nickel-based alloy powder | 100-270mesh | 30-35 | 3-Jan | ＞500h | Level 9 | High corrosion resistant parts surface laser additive | ||
Cobalt-6 | Cobalt-based alloy powder | 100-325mesh | 35-40 | 3-Jan | ＞500h | Level 9 | High corrosion and wear resistance parts surface laser additive: high temperature and high pressure valves, turbine blades, etc | ||
Cobalt-12 | Cobalt-based alloy powder | 100-325mesh | 40-44 | 2-Jan | ＞500h | Level 9 | Laser additive manufacturing for high corrosion and wear-resistant components: screw rods, serrated surfaces, high-temperature and high-pressure valves | ||
JF501 | Copper-based alloy powder | 100-270mesh | 220-260（HB） | 5-Jan | / | / | Bimetallic bushing, internal wall laser additive, etc | ||
JF2030 | Nickel-based with 10-30%WC | 100-270mesh | 40-50 (matrix) | 3-Jan | Laser additive surface treatment for high wear and corrosion resistance components | ||||
JF2060 | Nickel-based composite powder: nickel-based + 60%WC | 100-270mesh | <45 (matrix) | 2-Jan | Laser additive surface treatment for high wear and corrosion resistance components | ||||
JF1030 | Fe-based with 10-30%WC | 100-270mesh | 40-50 (matrix) | 3-Jan | Laser additive surface treatment for high wear and corrosion resistance components | ||||
JF1060 | Fe(60%WC) | 100-270mesh | <45 (matrix) | 2-Jan | High wear resistance parts surface laser additive | ||||
JF601 | Titanium-based powder | 100-270mesh | 40-50 | 2-Jan | ＞500h | Level 9 | Titanium part surface laser additive |
External wall cladding powder
hardness range HRC | 52-58 |
salt spray test NSS | Greater than 1000h |
Appearance Rating | Level 9 |
cutting ability | ample |
size range | -100/+270 mesh |
flowability | ≤20s/50g |
apparent density | 4.0~4.6g/cm³ |
oxygen content | ≤500ppm |
内孔熔覆粉末
硬度范围HRC | 28-35 | |
盐雾试验NSS | 大于1000h | |
外观评级 | 9级 | |
切削能力 | 良 | |
粒度范围 | -100/+270目 | -270/+500目 |
流动性 | 14-18s/50g | 16-20s/50g |
松装密度 | 4.0~4.6g/cm³ | 3.8~4.5g/cm³ |
氧含量 | ≤500ppm | |
